Questions About Experts You Must Know the Answers To

Tree Removal Basics

Cutting a trunk is fairly simple but cutting a tree or removing one is not a simple task. It will be difficult especially for large trees with many branches since they are usually not straight that you can simply cut through. Reasons for cutting a tree maybe due to damages done by a storm, or a tree blocking access to a place or the tree is simply being a general nuisance to the place.

IT is important that before you fell a tree, the surrounding areas need to be checked. A professional tree removal service should do the job if you observe that power lines are near the area, or if you live near a cliff or on top of a hill. You should only cut a tree yourself if the tree is on flat ground and the surrounding area is clear. Tree removal is time consuming and needs the proper tools and anyone who decides to cut a tree himself should always remember this. You should also designate two escape routes for yourself that you will use when the tree is about to fall.

The undercut is your first cut. This will guide the tree to fall. A V shaped notched should be cut in on the side where you want to tree to fall. Cut a notch of 90 degree angle and cut it to one fourth of the diameter of the trunk.
Interesting Research on Options – What No One Ever Told You

The back cut is the second cut. This cut should be done two inches higher than the undercut’s hinge part. The back cut is done on the opposite side where you don’t want the tree to fall on. With this cut, stress is removed from the tree allowing is to fall easily.
Learning The “Secrets” of Professionals

Go to your escape routes out of the path of the falling tree when it starts to fall. You can continue your work then the tree is safely on the ground.

Next you need to take out the limbs, by the process called limbing. Here you start taking out the branches from the bottom up. If you are cutting a branch, you should position yourself on its opposite side of the trunk. Tree trunks are usually stored for firewood and so you should start cutting it according to the desired lengths. If you want to deliver the branches for recycling, you should cut them to the required size according to your bylaws and bundle them up for pickup.

The stump is best left to the professionals. There is still a lot of tree under the ground that we can’t see. With your professional tree removal company you can get services like tree removal, tree trimming, stump grinding, and others.